Monitor the full HF frequency range with one receiver
PLATH SIR 5115 HF Receiver
The HF broadband receiver SIR 5115, covering the frequency range from 0.5 to 30 MHz, represents the benchmark of HF signal interception. It intercepts every signal simultaneously in the complete HF range.
Offering full high-resolution coverage and multiple virtual narrowband receivers, the SIR 5115 replaces entire banks of single channel receivers without compromising blocking dynamic range or intermodulation. This means having fewer receivers produce more signals with less error.
Product | PLATH SIR 5115 |
---|---|
Delivery | RX |
Requirement | --- |
Recommended | go2MONITOR Options: - Advanced Memory Scan - Output of 29.5 MHz in channels to 96 kHz - 240 additional DDC channels (this option could be used twice) - Graphical user interface WinMON |
Use Cases | Multi Channel Receiver up to 600 Channels Complete range 0.5- 30 MHz |
Training | on request |
Price | ask |
Features
- Excellent dynamic range: IMFDR 105 dB
- Full interception from 0.5 to 30 MHz
- High dynamic range due to 7 sub-octave filters
- Up to 600 virtual narrowband receivers
- No internal spurious responses
Multi band HF Receiver
Specifications
Feature | Data |
---|---|
Frequency range | 0.5 - 30 MHz |
Tuning resolution (DDC) | < 1 Hz |
Coherent bandwidth | 29.5 MHz, (digital in 40 subbands) |
DDC channels | 320 channels, wideband IQ 40 x 768 kHz |
Preselection | 7 high- and low pass filters |
Gain control | Automatic, manual or automatic with user defined shift (AGC + M) |
Maximum input level | + 30 dBm (non-destructive) |
Noise figure | < = 12 dB (without preselection) |
MDS (Minimum Detectable Signal) | -139 dBm (at 125 Hz resolution, 500 ms integration) |
SFDR (Spurious-Free Dynamic Range) | typ. 105 dB > 100 dB (2 - 30 MHz, in-band) > 95 dB (0.5 - 2 MHz, in-band) |
Input IP2 | > = 80 dBm (at 0 dBm and with AGC), presel.: off |
Input IP3 | > = 43 dBm (at 0 dBm and with AGC) |
BDR (Blocking Free Dynamic Range) | 140 dB/Hz |
Full dynamic range | 169 dB |
IF rejection | > 140 dB |
Image rejection | > 90 dB |
Internal spurious | None |
Frequency stability | +/- 10E-7 |
Frequency drift | < +/- 5* 10E-7 ageing / year |
Phase noise | < -150 dBc / Hz at 10 kHz offset |
VSWR | < 2 : 1 |
Antenna input | 5 x N-connector female (nominal impedance 50 Ohm) |
Input for external reference frequency | BNC-female (10 MHz) |
Input for time synchronization | BNC: pulse per second (PPS) |
Network interface | 7 x Gigabit Ethernet (for control and data) |
Service connection | RS-232 |
Operating voltage | 90 - 264 VAC (50 / 60 Hz) |
Maximum power consumption | 400 VA |
Built In Test Equipment (BITE) | For every internal module, via SNMP interface |
MTBF (according to MIL-HDBK) | At least 10,000 hours |
Operating temperature | 0 grd C to +50 grd C |
Storage temperature | -40 grd C to +70 grd C |
Humidity | < = 85 % (non-condensing) |
Environmental standards maintained | EN61010-1:2002, EN61000-6-2:2002, EN61000-6-3:2002 |
Width | 19 inch (482.6 mm) |
Height | 3 RU (133.5 mm) |
Depth | 605 mm |
Weight | 15.3 kg |