Multiple bands of interest can be covered simultaneously by freely selecting 16 digital sub-bands within the entire HF range.
PLATH SIR 5110 HF Receiver
The HF receiver SIR 5110, with an instantaneous analogue bandwidth of 29.5 MHz, covers the frequency range from 0.5 to 30 MHz. Its modular and flexible design allows various configurations to incorporate different mission scenarios from manual interception to automatic communication intelligence (COMINT)
The SIR 5110 sets the benchmark for new generation compact HF search and interception receivers.
Multiple bands of interest can be covered simultaneously by freely selecting 16 digital sub-bands within the entire HF range.
| Product | PLATH SIR 5110 |
|---|---|
| Delivery | RX |
| Requirement | --- |
| Recommended | go2MONITOR Options: - Multi client: 4 clients with 4 virtual narrowband monitoringreceivers per client - 100 virtual narrowband monitoring receivers -16 x 768 kHz wideband I/Q channels - Graphical user interface WinMON - Panoramic monitoring view - Advanced memory scan |
| Use Cases | HF monitoring COMINT |
| Training | on request |
| Price | ask |
Features
- Excellent dynamic range: IMFDR 105 dB
- 16 x 768 kHz bandwidth (12.288 MHz overall)
- Up to 120 integrated virtual narrowband receivers
- No internal spurious responses
Multi band HF Receiver
Specifications
| Feature | Data |
|---|---|
| Frequency range | 0.5 - 30 MHz |
| Tuning resolution (DDC) | < 1 Hz |
| Coherent bandwidth | 29.5 MHz, 12.288 MHz digital (in 16 subbands) |
| DDC channels | Basic version: 4 x 20 kHz bandwidth Optional: 20 - 120 x 20 kHz bandwidth Optional: Wideband IQ 16 x 768 kHz |
| Preselection | 7 high- and low pass filters |
| Gain control | Automatic, manual or automatic with user defined shift (AGC + M) |
| Maximum input level | + 30 dBm (non-destructive) |
| Noise figure | < = 12 dB (without preselection) |
| MDS (Minimum Detectable Signal) | -139 dBm (at 125 Hz resolution, 500 ms integration) |
| SFDR (Spurious-Free Dynamic Range) | typ. 105 dB > 100 dB (2 - 30 MHz, in-band) > 95 dB (0.5 - 2 MHz, in-band) |
| Input IP2 | > = 80 dBm (at 0 dBm and with AGC), presel.: off |
| Input IP3 | > = 43 dBm (at 0 dBm and with AGC) |
| BDR (Blocking Free Dynamic Range) | 140 dB/Hz |
| Full dynamic range | 169 dB |
| IF rejection | > 140 dB |
| Image rejection | > 90 dB |
| Internal spurious | None |
| Frequency stability | +/- 10E-7 |
| Frequency drift | < +/- 5* 10E-7 ageing / year |
| Phase noise | < -150 dBc / Hz at 10 kHz offset |
| VSWR | < 2 : 1 |
| Antenna input | N-connector female (nominal impedance 50 Ohm) |
| Input for external reference frequency | BNC-female (10 MHz) |
| Input for time synchronization | BNC: pulse per second (PPS) |
| Network interface | 2 x Gigabit Ethernet (for control and data) |
| Service connection | RS-232 |
| Operating voltage | 90 - 264 VAC (50 / 60 Hz) |
| Maximum power consumption | 150 VA |
| Built In Test Equipment (BITE) | For every internal module, via SNMP interface |
| MTBF (according to MIL-HDBK) | At least 10,000 hours |
| Operating temperature | 0 grd C to +50 grd C |
| Storage temperature | -40 grd C to +70 grd C |
| Humidity | < = 85 % (non-condensing) |
| Environmental standards maintained | EN61010-1:2002, EN61000-6-2:2002, EN61000-6-3:2002 |
| Width | 19 inch (482.6 mm) |
| Height | 1 RU (44.5 mm) |
| Depth | 490 mm |
| Weight | 7 kg |