With fast scan and the signal search and alert, the receiver becomes future-proof and well prepared for new upcoming tasks.
PLATH SIR 2115 HF-V/UHF Receiver
New league of high-end wideband receiver for signal search and interception.
The SIR 2115 covers the VLF-UHF frequency range from 9 kHz to 3 GHz. It's top-notch modular and flexible design and the remarkable high scan speed of 100 GHz/s allows various configurations to incorporate different scenarios from manual interception to automatic communication intelligence (COMINT).
The extended frequency range empowers new use cases in signal search and analysis. Compared to other receivers the fast scan of 100 GHz / s over the entire frequency range significantly reduces the time needed to create a list of emissions prior to final analysis. The signal search and alert feature is a very efficient and flexible tool for observation of multiple signals of interest at the same time. These outstanding benefits, combined in just one device, allow the user to save and focus the resources.
| Product | PLATH SIR 2115 |
|---|---|
| Delivery | RX |
| Requirement | --- |
| Recommended | go2MONITOR |
| Use Cases | Wideband monitoring with one device Broadband acquisition of a coherent analogue bandwidth of 80 MHz Signal interception of up to 20 signals in parallel Spectrum monitoring with fast scan |
| Training | on request |
| Price | ask |
Features
- 9 kHz to 3000 MHz
- Receiver from VLF to UHF
- Fast scan of 100 GHz/sec
- Wideband I/Q data output 4 x 20 MHz
- 20 virtual narrowband receivers (DDC)
- Optional: 3 to 6 GHz extension
Spectrum Monitoring
Specifications
| Characteristics | Data |
|---|---|
| Frequency range | 9 kHz to 3 GHz (Option: 3 GHz to 6 GHz extension) |
| Coherent bandwidth | 80 MHz (30 MHz HF) |
| DDC channels | Wideband IQ 4 x 20 MHz 20 narrowband channels (50 /100 / 200/400 kHz) |
| Tuning resolution (DDC) | < 1 Hz |
| Preselection | 10 high and low pass filters |
| Maximum input level | + 15 dBm (non-destructive) |
| Noise figure | typ. 9 dB (degraded performance for 9 kHz to 30 MHz, 3 GHz to 6 GHz) |
| VSWR | 2:1 |
| MDS (Minimum Detectable Signal) | -137 dBm (at 500 Hz resolution) |
| SFDR | > 90 dB (9 kHz to 3 GHz, in-band) |
| Input IP2 | > 70 dBm (at 0 dBm and with AGC) |
| Input IP3 | > 30 dBm (at 0 dBm and with AGC) |
| Frequency stability | < +/- 1* 10E-7 |
| IF rejection | > 130 dB |
| Image rejection | > 120 dB |
| Antenna input | 3 x N-connector female (nominal impedance 50 ?) |
| Input/Output for external reference frequency | 2 x BNC-female (10 MHz) |
| Input for time synchronization | BNC: pulse per second (PPS) |
| Network interface | 1 x 10 GBASE-SR, OM3 MM fiber (data UDP) 1 x 1000 Base-T (control, data TCP/IP) |
| Service connection | RS-232 |
| Operating voltage | 85 - 264 VAC (50/60 Hz) |
| Power consumption | 200 VA |
| Operating temperature | 0 to +50 grd C |
| Storage temperature | -40 to +70 grd C |
| Humidity | <= 85% (non-condensing) |
| Environmental standards maintained | EN61010-1:2002, EN61000-6-2:2002, EN61000-6-3:2002 |
| Width | 19 inch (482.6 mm) |
| Height | 1 RU (44.5 mm) |
| Depth | 490 mm |
| Weight | 10 kg |