shoc News Reader

26. Jan 2022 - 16:40

by Rolf Haenggi (comments: 0)

Release V22.1, January 2022

Decoder channels bandwidth increased from 1.5 to 4 MHz
ADS-B/Mode-S
Siemens CHP-200
DUP-FEC-2
DUP-ARQ 2
HF-FAX/Weather-Fax
KG-STV
SSTV
Improved speech quality of the AMBE codec with weak NXDN, APCO25, DMR and DPMR signals
CODAN Chirp: added burstinfo output
DMR: Implemented automatic decryption of Hytera Basic. Improved decoding and output of IP data as pcap file
DMR continuous: Implemented automatic decryption of Motorola Basic. Decryption of ARC4/DES/AES with provided key. Improved decoding and output of IP data as pcap file
TETRA: Decryption of TEA 1/3/4 with given key (DMO, Downlink)
NXDN: Full decoding of trunking repeater frames
ACARS/HFDL,VSL2/INMARSAT AERO P/R/T:
- Improved decoding of Media Advisory Messages
- Media Independent Aircraft Messaging with reassembly
- Reassembly of fragmented messages
- XML output for post-processing

R&S ESMD receiver: Added receiver control and IF-Panorama / Panorama-Scan support
R&S EB500 receiver: Added IF-Panorama / Panorama-Scan support
Jumbo-Frames to increases maximum bandwidth for R&S receivers
Update driver for USRP receiver to solve some communication problems

Bandwidth of 5 MHz for VHF/UHF and 1 MHz for HF
Signal activity triggered recording (Parameters: SNR, lead time, follow-up time max. duration, min. pause)
Decoders with additional files (for example alphabets) can now be used with go2MONITOR
In Viewer GUI configuration, File or Stream Playback address for narrowband channels will be determined automatically, without need to set “FilePlaybackIPAddress” value in the configuration
Various improvements in frequency management: Column group will be automatically enlarged during editing, new frequencies will remain visible after adding, speed up frequencies import with duplicated entries

Additional AMT task type: Continuous fixed-frequency monitoring
Signal activity triggered recording (Parameters: SNR, lead time, follow-up time max. duration, min. pause)
The length of NB-recording files stored by AMT tasks changed from 30 s to 5 minutes to match the length of produced audio files
Changed triggering strategy in AMT: If begin of triggering emission cannot be reached by using delay buffer, the action will start with the current time and not with the maximal delay time
Improved detection of whether a frequency is already being processed to prevent duplicate processing of the same emission
Configuration with longer maximal delay time (license option) in a channel allow entering delay value manually instead of only choosing from a drop-down
If trigger based on detection in overview spectrum is used in an AMT-Live task, the option “Use modem list from trigger emission” will be turned off and disabled

go2MONITOR-8 with WMPC-32 has 8 full decoding channels and 24 additional classification, recording, analog audio demodulation channels
go2MONITOR-4 with WMPC-16 has 4 full decoding channels and 12 additional classification, recording, analog audio demodulation channels