Cross Country Wireless HF Active Loop Antenna v4 HF
Cross Country Wireless manufacture a HF Active Loop Antenna with a frequency range of 500 kHz to 55 MHz.
This loop antenna can be ordered together with a HF multicoupler with a bias tee built in to power the antenna.
The antenna uses a double loop of 350 mm.
Key Facts
- Broadband design from 500 kHz - 55 MHz with small 350 mm loop
- The antenna has a poly carbonate box housing the amplifier with antenna loops made from heavy coaxial cable with transparent polycarbonate spacers.
- To be used in horizontal or vertical mode
- Easy installation in areas with restricted access
Technical Data
| Feature | Value |
|---|---|
| Frequency range | 500 kHz - 55 MHz |
| Loop diameter | 350 mm |
| IP2 | > +70 dBm |
| IP3 | > +32 dBm |
| Impedance | 50 Ohm |
| Gain | 25 dB at 14 MHz |
| Noise figure | 0.79 dB |
| Housing | 98 mm x 90 mm x 38 mm, IP65 |
| Weight | 0.6 kg |
| Power Supply | 9 to 15 V from a bias-tee feed, 100 mA |
| Connector | BNC |
Cross Country Wireless
Small antenna , easy to install.
RF overload protection to allow it to be used very close to transmit antennas
